Anti-Gravity Mirror

Step 1:  Glue 5’x3’x1/4” to ½” plywood with epoxy.

Step 2:  Cut top and bottom frame out of 2”x4” wooden beams, rabbeted ¾” in the middle of each board.

Step 3:  Attach frame with wood screws.

Step 4:  Attach vertical 2”X3” beams down the center of the back for support using wood screws.

Step 5:  Build back brace for durability using wood screws.

Step 6:  Place cement block on back brace.

Construction was taken from Exploratorium Cookbook III Recipe No. 169.

SIGN PAGE   BUDGET